Angular Contact Ball Bearings
Single row angular contact ball bearing. Single row angular contact ball bearings can only withstand axial loads in one direction. When subjected to radial loads, it will cause additional axial forces and must be applied to the corresponding reverse load. Therefore, such bearings are generally used in pairs.This article describes what is an angular contact bearing, constructional aspects of angular contact bearings, sealed and open bearings. Angular Contact Bearings are constructional bearings which use the rolling element as the ‘Ball’. This is one more type of bearing using the ‘ball’ as the rolling element.
Angular Contact Ball Bearings. Designed to accommodate axial and radial loads acting simultaneously. Balls separated by high-speed Polyamide cages. Constructed from high-quality SAE-52100 chromium bearing steel. Single Row designs can accommodate axial loads in one direction only and are commonly used adjusted against a second bearing.

- AST H7028C angular contact ball bearings
- 1,600 rpm
- 422 mm

- Toyana 71940 CTBP4 angular contact ball bearings
- 41.40 mm
- 7.57

- Toyana QJ1020 angular contact ball bearings
- K60x68x20
- 68

- Toyana 7011 C-UX angular contact ball bearings
- 4 500 r/min
- 85 mm

- 85 mm x 130 mm x 22 mm NSK 85BER10X angular contact ball bearings
- 4 500 r/min
- 85 mm

- 15 mm x 42 mm x 25 mm INA ZKLFA1563-2RS angular contact ball bearings
- 4 500 r/min
- 85 mm

- AST 5217 angular contact ball bearings
- 1,600 rpm
- 422 mm